China IP68 PAR56 LED Swimming Pool Lamp 350LED

PAR56 LED Swimming Pool Lamp 1.Input voltage:AC12V 2.Waterproof:IP68 3LED QTY:252LED/350LED/558LED Application:swimming pool

Model	OL-PAR56-350
Input Voltage	AC12V
LED Qty	350PCS LED
Power	25W
Dimension(mm)	178*114/106
Material	Glass
Color	RGB/White/Green/Blue
Packing	one piece individual box
Package	10pcs per exported carton
IP Rating	IP68

 PAR56 LED Swimming pool Lamp features:

Viewing angle: 15 to 30°IP range: IP68Housing: glassInstall type: wall-mountedController: RF remote controllerDimensions: 175 x 108mm  or 174x 114mmProgram can be made as per requestOEM/ODM orders are welcome

PAR56 LED Swimming pool lamp apllication

Widely used for the decoration lighting under water or any water view such as the swimming pool, eruptive fountain, man-made lake.

Instructions of remote control

RGB gradient change illuminated in the first power on or press button “D” to turn on the lightSwitch off/on the power each time,the color will be changed with following sequence:Red→green→blue→RGB→RGB gradient change slow→RGB gradient change fast→disco mode slow→disco mode fast→The speed is constantly changing on the flickering effectInstructions of remote control

1)        Continue pressing the button “A” to make the 3 group led change in seven stages:Red→green→blue→red+green→red+blue→green+blue→RGB

2)        Continue pressing the button “B” to make the 3 group led change in 3 modes:

RGB gradient changeDisco modeBlinking change

3)        Pressing button “C” to adjust the speed of “A” and “B”

4)        Pressing button “D” to switch on/off the led light

5)        It will reset in 5 seconds after power off

6)        The remote control can operate many led lights synchronously

Installation procedure

Screw the bracket into the wallMount the clip of the bracket into the hole of the lightScrew the detailed illustrations in the below pictures

Cautions

Work with AC12V, otherwise the light will be possibly damagedThis light should be installed not deeper than 50cm underwaterThe power wire of the lights shall be joined with other power wire out of the water. Waterproof treatment should be done if the joint is in the water otherwise there is risk for water intrusion.    The light should be in the water for the test of remote function or other functions, and don’t test it more than 3 minutes out of the water otherwise the light will be possibly damaged or caused disfunction . If the user is not available to test it in the water, then please shut off the light every 3 minutes to be cold for the new test  

PAR56 LED Swimming pool lamp Specification:

China IP68 PAR56 LED Swimming Pool Lamp 350LED